ENGINE
- Maker YANMAR
- Model 3TNV80F
- Type 4 Cycle Inline, Water Cooled Diesel
- Number of Cylinders 3
- Bore and Stroke in (mm) 3.15x3.30 (80x84)
- Total Displacement cu in (L) 77.2 (1.266)
- Gross Power: EPA Regulation HP (kW) 23.9 (17.8)
- Net Power HP (kW) 21.7 (16.2)
- Rated Revolution RPM 3,200
- Maximum Torque ft.lbs (Nm) 45.7 (62.0)
- Battery 540 CCA
- Fuel Diesel
CAPACITIES
- Fuel Tank US gal (L) 6.1 (23.0)
- Engine Oil US qt (L) 3.6 (3.4)
- Engine Coolant US qt (L) 3.0 (2.8)
- Transmission Oil US gal (L) 4.1 (15.5)
- Front Axle Oil US gal (L) 3.7 (3.5)
- DIMENSIONS in. (mm)
- Overall Length (with 3-Point Hitch) 105.8 (2,688)
- Overall Width (with R4 Tires) 54.1 (1,373)
- Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 87.2 (2,215)
- Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 71.8 (1,824)
- Overall Height (with R4 Tires, Top Of Steering Wheel) 56.7 (1,440)
- Wheel Base 63.0 (1,600)
- Minimum Ground Clearance (with R4 Tires) 9.9 (249)
- Tread (with R4) Front: 37.8 (960), Rear: 40.5 (1,029)
WEIGHT lb. (kg)
- (with ROPS, R4 Tires) 1,830 (830)
TRAVELING SYSTEM
- Tires Ag (R1) Front, Rear:
- Turf (R3) Front: 23x8.50-12 4PR, Rear: 36x14.00-15 4PR
- Industrial (R4) Front: 23x8.50-12 4PR, Rear: 14-17.5 6PR
- Clutch - Steering Hydrostatic Power
- Transmission - Hydrostatic Transmission, Dual Range Speeds
- Drive - Selected 4WD
- Brake - Wet Disk
- Minimum Turning Radius: ft. (m) 8.5 (2.6)
|
HYDRAULIC UNIT
- Hydraulic Control System Position Control, Open Center
- Pump Capacity (implement) US gal/min. (L/min) 4.3 (16.1)
- Pump Capacity (steering) US gal/min. (L/min) 3.7 (14.1)
- 3-Point Hitch Limited Category 1
- Maximum Lift Force Lift Point lb (kg) - 24 in Behind Lift Point lb. (kg) 1,209 (548)
- System Pressure psi (MPa) 2,429 (16.7)
- POWER TAKE OFF (PTO)
- Power Take Off (PTO) Power HP (kW) 18.1 (13.5)
- Type Hydraulic Clutch
- Rear Shaft Size 35 mm OD, 6 Splines
- Type Independent
- Speed/Engine RPM 554/3,200
- Mid Shaft Size SAE16/32, 15 Splines
- Type Independent
- Speed/Engine RPM 2,057/3,200
TRAVELING SPEEDS
- Forward mph (km/h) Low: 0-6.3 (0-10.0), High: 0-13.1 (0-21.0)
- Reverse mph (km/h) Low: 0-4.3 (0-7.0), High: 0-9.1 (0-14.7)
YANMAR YL210 CURVED BOOM LOADER SPECIFICATIONS
- Maximum Lift Height to Pivot Pin in (mm) 79 (2,000)
- Maximum Lift Height Under Level Bucket in (mm) 58 (1,465)
- Reach at Maximum Lift Height in (mm) 36 (920)
- Reach with Bucket on Ground in (mm) 53 (1,355)
- Digging Depth in (mm) 3.9 (100)
- Maximum Drop Angle degree 45
- Maximum Rollback Angle degree 30
- Lift Capacity (Pivot Pin) lb (kg) 1,200 (545)
- Breakout Force (Pivot Pin) lb (kg) 2,090 (950)
- Rollback Force (Ground Line) lb (kg) 1,518 (690)
- Rated Flow GPM (L/m) 4.3 (16.1)
- System Pressure psi (MPa) 2,429 (16.7)
- Rising Time to Full Height w/o Load sec 3.7
- Lowering Time w/o Load sec 2.3
- Attachment Rollback Time sec 2.3
- Attachment Dumping Time (REGEN) sec 1.6
- Bucket Width in (mm) 53 (1,346)
- Bucket Capacity cu ft (m3) 5.65 (0.16)
- Bucket Weight lb (kg) 145 (66)
- Loader Weight w/Bucket Ib (kg) 508 (231)
AVAILABLE ATTACHMENTS FOR THE YANMAR 425
- Front End Loader
- Front Blade
- 3 Pt Attachments
- Backhoe Snow Blower
- Mid-Mount Mower
- Note: Attachments sold separately. Please see your dealer for details.
|
