ENGINE
- Maker YANMAR
- Model 3TNM74F
- Type 4 Cycle Inline, Water Cooled Diesel
- Number of Cylinders 3
- Bore and Stroke in (mm) 2.92x3.03 (74x77)
- Total Displacement cu In (L) 60.6 (0.993)
- Gross Power: EPA Regulation HP (kW) 21.5 (16.0)
- Net Power HP (kW) 19.4 (14.5)
- Rated Revolution RPM 3,200
- Maximum Torque ft. lbs (Nm) 39.4 (53.5)
- Battery 540 CCA
- Fuel Diesel
CAPACITIES
- Fuel Tank US gal (L) 6.1 (23.0)
- Engine Oil US qt (L) 3.1 (2.9)
- Engine Coolant US qt (L) 3.0 (2.8)
- Transmission Oil US gal (L) 4.1 (15.5)
- Front Axle Oil US gal (L) 3.17 (3.0)
DIMENSIONS in. (mm)
- Overall Length (with 3-Point Hitch) 102.1 (2,594)
- Overall Width (with R4 Tires) 47.3 (1,200)
- Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 82.3 (2,090)
- Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 66.3 (1,683)
- Overall Height (with R4 Tires, Top Of Steering Wheel) 51.1 (1,299)
- Wheel Base 57.9 (1,400)
- Minimum Ground Clearance (with R4 Tires) 6.4 (163)
- Tread (with R4) Front: 35.2 (894), Rear: 35.2 (894)
WEIGHT lb. (kg)
- (with ROPS, R4 Tires) 1,537 (697)
TRAVELING SYSTEM
- Tires Ag (R1) Front, Rear: -
- Turf (R3) Front: 18x8.50-10 4PR, Rear: 26x12.0-12 4PR
- Industrial (R4) Front: 18x8.50-10 6PR, Rear: 26x12.0-12 4PR
- Clutch - Steering Hydrostatic Power
- Transmission Hydrostatic Transmission, Dual Range Speeds
- Drive Selected 4WD
- Brake Wet Disk
- Minimum Turning Radius ft (m) 7.87 (2.4)
|
HYDRAULIC UNIT
- Hydraulic Control System Position Control, Open Center
- Pump Capacity (implement) US gal/min (L/min) 4.3 (16.1)
- Pump Capacity (steering) US gal/min (L/min) 3.7 (14.1)
- 3-Point Hitch Limited Category 1
- Maximum Lift Force Lift Point lb (kg)
- 24 in Behind Lift Point lb (kg) 660 (300)
- System Pressure psi (MPa) 1,891 (13.00)
POWER TAKE OFF (PTO)
- Power Take Off (PTO) Power HP (kW) 15.6 (11.6)
- Type Hydraulic Clutch
- Rear Shaft Size 35 mm OD, 6 Splines
- Type Independent
- Speed/Engine RPM 554/3,200
- Mid Shaft Size SAE16/32, 15 Splines
- Type Independent
- Speed/Engine RPM 2,057/3,200
TRAVELING SPEEDS
- Forward mph (km/h) Low: 0-4.5 (0-7.3), High 0-9.5 (0-15.2)
- Reverse mph (km/h) Low: 0-3.2 (0-5.1), High 0-6.6 (0-10.6)
YANMAR YL110 CURVED BOOM LOADER SPECIFICATIONS
- Maximum Lift Height to Pivot Pin in (mm) 71 (1,800)
- Maximum Lift Height Under Level Bucket in (mm) 51 (1,295)
- Reach at Maximum Lift Height in (mm) 24 (610)
- Reach with Bucket on Ground in (mm) 47 (1,205)
- Digging Depth in (mm) 3.9 (100)
- Maximum Drop Angle degree 40
- Maximum Rollback Angle degree 30
- Lift Capacity (Pivot Pin) lb (kg) 825 (375)
- Breakout Force (Pivot Pin) lb (kg) 1,342 (610)
- Rollback Force (Ground Line) lb (kg) 1,122 (510)
- Rated Flow GPM (L/m) 4.3 (16.1)
- System Pressure psi (MPa) 1,891 (13.0)
- Rising Time to Full Height w/o Load sec 3.0
- Lowering Time w/o Load sec 1.8
- Attachment Rollback Time sec 2.2
- Attachment Dumping Time (REGEN) sec 1.5
- Bucket Width in (mm) 48 (1,219)
- Bucket Capacity cu ft (m3) 5.3 (0.15)
- Bucket Weight lb (kg) 130 (59)
- Loader Weight w/Bucket Ib (kg) 425 (193)
AVAILABLE ATTACHMENTS FOR THE YANMAR 223
- Front End
- Loader Front Blade
- 3 Pt Attachments
- Backhoe
- Snow Blower
- Mid-Mount Mower
- Note: Attachments sold separately. Please see your dealer for details.
|
